The Impact of Limiting Reactive Power Flows on Active Power Losses in Lighting Installations

Road lighting is one of the most important services provided by public entities. Entities providing such a service are interested in providing it with the lowest possible financial outlays. When planning modernization, unfortunately, one forgets about hidden operating costs, which are caused by, among others, the flow of reactive energy in the circuit. The use of modern light sources also involves the use of electronic systems in their accessories, which makes these electrical energy receivers capacitive. This is due to the lack of use of individual compensation systems in the luminaires themselves. Due to the above, the costs of capacitive reactive energy flow also increase. Newly designed road lighting installations, as well as modernized ones, are equipped with electronic systems enabling their effective control. The operation of such systems also causes fluctuations in the reactive power value, which must be compensated. Commonly used compensation choke systems also introduce additional active power losses, which makes the expected savings lower than expected. In the article, the authors presented selected results of measurements of the electrical parameters of LED luminaires, carried out both in the laboratory and in used road lighting circuits. The determined amounts of active power losses caused by the installation and operation of additional equipment in the road lighting installation, such as compensating chokes, are presented. The calculations were made based on the example of a selected fragment of the audit of this installation. On this basis, modernization was carried out and measurements of current electricity quality parameters were carried out.