IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v17y2024i16p4013-d1455450.html
   My bibliography  Save this article

Comparative Analysis of Heat Transfer in a Type B LNG Tank Pre-Cooling Process Using Various Refrigerants

Author

Listed:
  • Qiang Sun

    (Dalian Shipbuilding Industry Co., Ltd., Dalian 116005, China)

  • Yanli Zhang

    (Dalian Shipbuilding Industry Co., Ltd., Dalian 116005, China)

  • Yan Lv

    (Dalian Shipbuilding Industry Co., Ltd., Dalian 116005, China)

  • Dongsheng Peng

    (Dalian Shipbuilding Industry Co., Ltd., Dalian 116005, China)

  • Siyu Zhang

    (State Key Laboratory of Structural Analysis for Industrial Equipment, School of Mechanics and Aerospace Engineering, Dalian University of Technology, Dalian 116024, China)

  • Zhaokuan Lu

    (Ningbo Institute of Dalian University of Technology, Ningbo 315016, China)

  • Jun Yan

    (State Key Laboratory of Structural Analysis for Industrial Equipment, School of Mechanics and Aerospace Engineering, Dalian University of Technology, Dalian 116024, China
    Ningbo Institute of Dalian University of Technology, Ningbo 315016, China)

Abstract

This study presents a comprehensive three-dimensional Computational Fluid Dynamics (CFD) analysis of the pre-cooling process of a Type B LNG tank using various refrigerants, including liquid nitrogen (LN), nitrogen gas (NG), liquefied natural gas (LNG), boil-off gas (BOG), and their combinations. The simulation model accounts for phase change (through the mixture multiphase model), convective heat transfer, and conjugate heat exchange between the fluid and the tank structure. The results indicate that liquid nitrogen is the most efficient refrigerant, achieving the highest cooling rate through both latent and sensible heat. LNG also demonstrated a relatively high cooling rate, 79% of that of liquid nitrogen. Gas-only pre-cooling schemes relying solely on sensible heat exhibited slower cooling rates, with BOG achieved 79.4% of the cooling rate of NG. Mixed refrigerants such as NG + LN and BOG + LNG can achieve comparable, while slightly slower, cooling than the pure liquid refrigerants, outperforming gas-only strategies. A further assessment of the heat transfer coefficient suggests the mixed cooling schemes have almost identical heat transfer coefficient on the inner tank surface to the liquid cooling scheme, over 5% higher than the gas refrigerants. The study also highlighted the uneven temperature distribution within the tank due to the bulkhead’s blockage effect, which can induce significant thermal stress and potentially compromise structural integrity. Mixed schemes exhibit thermal gradients higher than those of gas schemes but lower than those of liquid schemes, while achieving cooling speeds comparable to liquid schemes if the inlet velocity of the refrigerants is properly configured. These findings offer valuable insights for developing safer and more efficient pre-cooling procedures for Type B LNG tanks and similar cryogenic storage tanks.

Suggested Citation

  • Qiang Sun & Yanli Zhang & Yan Lv & Dongsheng Peng & Siyu Zhang & Zhaokuan Lu & Jun Yan, 2024. "Comparative Analysis of Heat Transfer in a Type B LNG Tank Pre-Cooling Process Using Various Refrigerants," Energies, MDPI, vol. 17(16), pages 1-19, August.
  • Handle: RePEc:gam:jeners:v:17:y:2024:i:16:p:4013-:d:1455450
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/17/16/4013/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/17/16/4013/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:17:y:2024:i:16:p:4013-:d:1455450. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.