Impact of Aromatic Hydrocarbons on Emissions in a Custom-Built High-Pressure Combustor

This study addresses the ongoing demand for increased efficiency and reduced emissions in turbomachinery combustion systems. A custom-built high-pressure combustor was designed and manufactured at the Low Carbon Combustion Centre (LCCC) of the University of Sheffield to investigate the impact of different aromatic hydrocarbons on emission rates. The research involved the comprehensive testing of Jet−A1 fuel and six aromatic species blends under high-pressure conditions of 10 bar. Based on the numerical CFD simulations by ANSYS 19.2, tangential dual air injection and a strategically placed V-shaped baffle plate were utilised to enhance fuel-air mixing and combustion stability. Experimental results demonstrated a negative correlation between combustion temperature and particulate matter (PM) emissions, with higher temperatures yielding lower PM emissions. Unburned hydrocarbons (UHCs), nitrogen oxides ( N O x ), carbon monoxide ( C O ), and carbon dioxide ( C O 2 ) emissions were also analysed. Ethylbenzene produced the highest UHC and C O emissions, while Indane exhibited the lowest levels of these pollutants, suggesting more complete combustion. O−xylene generated the highest N O x emissions, correlating with its higher combustion temperatures. This research enhances our understanding of gas turbine combustor design and the combustion behaviour of aromatic species, providing valuable insights for developing low-emission, high-efficiency gas turbine combustion technologies.