Mechanism of High-Pressure Dilation of Steam-Assisted Gravity Drainage by Cyclic Multi-Agent Injection

The reservoir properties of super-heavy oil reservoirs in fluvial sedimentation are relatively poor, with high heterogeneity directly affecting the steam injection rate and expansion velocity of the steam chamber in the SAGD process. In order to significantly improve SAGD production performance, a combination of laboratory testing and physical simulation experiments was used to analyze the changes in reservoir-rock structure, rock geomechanical characteristics, and porosity and permeability during high-pressure injection, through rock geomechanics testing, core-flood experiment, and SEM scanning analysis. Large-scale two-dimensional physical simulation experiments were designed to analyze the effect of different injection agents in assisting the expansion of steam chambers. The experimental results showed that, with the increase in injection pore pressure, the reservoir permeability increased from 2.74 D to 4.56 D, and the contact between rock particles became looser after expansion, indicating a significant improvement in reservoir properties through high-pressure-injection-induced dilation. The results of the two-dimensional physical simulation experiments demonstrated that the solvent-assisted steam-chamber dilation speed was further increased compared with the conventional huff-n-puff dilation. Cyclic gas-injection volume can be increased from 0.16 PV in pure-steam injection cases to 0.32 PV. The hybrid-agent system of solvent-plus-gas can produce the dual positive effect of solvent dissolution and gas diffusion, more effectively improve the steam-chamber expansion speed, enhance the phased oil-recovery degree by 23.41%, and increase the oil/steam ratio from 0.27 to 0.33, indicating encouraging potentials in improving heavy oil and bitumen production performance by the dilation strategy.