IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v17y2024i13p3280-d1428722.html
   My bibliography  Save this article

Multiphysics Measurements for Detection of Gas Hydrate Formation in Undersaturated Oil Coreflooding Experiments with Seawater Injection

Author

Listed:
  • Bianca L. S. Geranutti

    (Center for Rock and Fluid Multiphysics, Colorado School of Mines, Golden, CO 80401, USA)

  • Mathias Pohl

    (Center for Rock and Fluid Multiphysics, Colorado School of Mines, Golden, CO 80401, USA)

  • Daniel Rathmaier

    (Center for Rock and Fluid Multiphysics, Colorado School of Mines, Golden, CO 80401, USA)

  • Somayeh Karimi

    (Center for Rock and Fluid Multiphysics, Colorado School of Mines, Golden, CO 80401, USA)

  • Manika Prasad

    (Center for Rock and Fluid Multiphysics, Colorado School of Mines, Golden, CO 80401, USA)

  • Luis E. Zerpa

    (Center for Rock and Fluid Multiphysics, Colorado School of Mines, Golden, CO 80401, USA)

Abstract

A solid phase of natural gas hydrates can form from dissolved gas in oil during cold water injection into shallow undersaturated oil reservoirs. This creates significant risks to oil production due to potential permeability reduction and flow assurance issues. Understanding the conditions under which gas hydrates form and their impact on reservoir properties is important for optimizing oil recovery processes and ensuring the safe and efficient operation of oil reservoirs subject to waterflooding. In this work, we present two fluid displacement experiments under temperature control using Bentheimer sandstone core samples. A large diameter core sample of 3 inches in diameter and 10 inches in length was instrumented with multiphysics sensors (i.e., ultrasonic, electrical conductivity, strain, and temperature) to detect the onset of hydrate formation during cooling/injection steps. A small diameter core sample of 1.5 inches in diameter and 12 inches in length was used in a coreflooding apparatus with high-precision pressure transducers to determine the effect of hydrate formation on rock permeability. The fluid phase transition to solid hydrate phase was detected during the displacement of live-oil with injected water. The experimental procedure consisted of cooling and injection steps. Gas hydrate formation was detected from ultrasonic measurements at 7 °C, while strain measurements registered changes at 4 °C after gas hydrate concentration increased further. Ultrasonic velocities indicated the pore-filling morphology of gas hydrates, resulting in a high hydrate saturation of theoretically up to 38% and a substantial risk of intrinsic permeability reduction in the reservoir rock due to pore blockage by hydrates.

Suggested Citation

  • Bianca L. S. Geranutti & Mathias Pohl & Daniel Rathmaier & Somayeh Karimi & Manika Prasad & Luis E. Zerpa, 2024. "Multiphysics Measurements for Detection of Gas Hydrate Formation in Undersaturated Oil Coreflooding Experiments with Seawater Injection," Energies, MDPI, vol. 17(13), pages 1-18, July.
  • Handle: RePEc:gam:jeners:v:17:y:2024:i:13:p:3280-:d:1428722
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/17/13/3280/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/17/13/3280/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:17:y:2024:i:13:p:3280-:d:1428722. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.