Author
Listed:
- Elena A. Yatsenko
(Department “General Chemistry and Technology Silicates”, Platov South-Russian State Polytechnic University (NPI), Prosveshcheniya Street 132, Rostov Region, 346428 Novocherkassk, Russia)
- Boris M. Goltsman
(Department “General Chemistry and Technology Silicates”, Platov South-Russian State Polytechnic University (NPI), Prosveshcheniya Street 132, Rostov Region, 346428 Novocherkassk, Russia)
- Andrey I. Izvarin
(Department “General Chemistry and Technology Silicates”, Platov South-Russian State Polytechnic University (NPI), Prosveshcheniya Street 132, Rostov Region, 346428 Novocherkassk, Russia)
- Viktor M. Kurdashov
(Department “General Chemistry and Technology Silicates”, Platov South-Russian State Polytechnic University (NPI), Prosveshcheniya Street 132, Rostov Region, 346428 Novocherkassk, Russia)
- Victoria A. Smoliy
(Department “General Chemistry and Technology Silicates”, Platov South-Russian State Polytechnic University (NPI), Prosveshcheniya Street 132, Rostov Region, 346428 Novocherkassk, Russia)
- Anna V. Ryabova
(Department “General Chemistry and Technology Silicates”, Platov South-Russian State Polytechnic University (NPI), Prosveshcheniya Street 132, Rostov Region, 346428 Novocherkassk, Russia)
- Lyudmila V. Klimova
(Department “General Chemistry and Technology Silicates”, Platov South-Russian State Polytechnic University (NPI), Prosveshcheniya Street 132, Rostov Region, 346428 Novocherkassk, Russia)
Abstract
Ash and slag waste (ASW) from coal combustion creates significant environmental and economic challenges. A promising method of ASW recycling is alkali activation with geopolymer material formation. This study investigates the influence of activating solution components (sodium hydroxide and sodium silicate) on the formation of porous geopolymers using ASW of different origins. The sodium hydroxide content of 0–4 wt.% and the sodium silicate content of 17–25 wt.% were studied. An increase in sodium hydroxide resulted in decreased density, but it adversely affected the strength. An increase in sodium silicate led to a compromised porous structure with relatively high density and compressive strength. An optimal composition, S19N3, comprising 3 wt.% of sodium hydroxide and 19 wt.% of sodium silicate obtained porous geopolymers with uniformly distributed 1.4–2 mm pores and a corresponding density of 335 kg/m 3 , a compressive strength of 0.55 MPa, a porosity value of 85.6%, and a thermal conductivity value of 0.075 W/(m·K). A mechanism for porous geopolymer formation was developed, including the interaction of alkaline components with ASW and a foaming agent, foaming, curing, and densification. The mechanism was examined using ASW from the Severodvinsk CHPP-1. This study allows for the optimization of geopolymer mixtures with various waste sources and the utilization of waste materials in the construction industry.
Suggested Citation
Elena A. Yatsenko & Boris M. Goltsman & Andrey I. Izvarin & Viktor M. Kurdashov & Victoria A. Smoliy & Anna V. Ryabova & Lyudmila V. Klimova, 2023.
"Recycling Ash and Slag Waste from Thermal Power Plants to Produce Foamed Geopolymers,"
Energies, MDPI, vol. 16(22), pages 1-19, November.
Handle:
RePEc:gam:jeners:v:16:y:2023:i:22:p:7535-:d:1278542
Download full text from publisher
Most related items
These are the items that most often cite the same works as this one and are cited by the same works as this one.
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:22:p:7535-:d:1278542. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.