A Laser-Based Heating System for Studying the Morphological Stability of Porous Ceria and Porous La 0.6 Sr 0.4 MnO 3 Perovskite during Solar Thermochemical Redox Cycling

Thermochemical processes are considered promising pathways to utilize solar energy for fuel production. Several physico-chemical, kinetic and thermodynamic properties of candidate oxides have been studied, yet their morphological stability during redox cycling under radiative heating is not widely reported. Typically when it is reported, it is for large-scale directly irradiated reactors (~1–10 kW th ) aimed at demonstrating high efficiency, or in indirectly irradiated receivers where the sample surface is not exposed directly to extreme radiative fluxes. In this work, we aimed to emulate heat flux conditions expected in larger scale solar simulators, but at a smaller scale where experimentation can be performed relatively rapidly and with ease compared to larger prototype reactors. To do so, we utilized a unique infrared (IR) laser-based heating system with a peak heat flux of 2300 kW/m 2 to drive redox cycles of two candidate materials, namely nonstoichiometric CeO 2-δ and La 0.6 Sr 0.4 MnO 3-δ . In total, 200 temperature-swing cycles using a porous ceria pellet were performed at constant p O 2 , and 5 cycles were performed for both samples by introducing H 2 O vapor into the system during reduction. Porous ceria pellets with porosity (0.55) and pore size (4–7 μm) were utilized because of their similarity to other porous structures utilized in larger-scale reactors. Overall, we observed that reaction extents initially decreased along with the decrease in reaction rates up to cycle 120 because of the change in structure and sintering. In the case of H 2 O splitting, ceria outperformed LSM40 in total H 2 production because of the low p O 2 during oxidation, where the oxidation of LSM40 is less favorable than that of ceria.