IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i1p286-d305847.html
   My bibliography  Save this article

A Case Study on the Optimal Design of the Horizontal Wellbore Trajectory for Hydraulic Fracturing in Nong’an Oil Shale

Author

Listed:
  • Ying Zhu

    (College of Construction Engineering, Jilin University, Changchun 130026, China
    Key Laboratory of Drilling and Exploitation Technology in Complex Conditions, Ministry of Natural Resources, Changchun 130026, China)

  • Han Zhang

    (College of Construction Engineering, Jilin University, Changchun 130026, China
    Key Laboratory of Drilling and Exploitation Technology in Complex Conditions, Ministry of Natural Resources, Changchun 130026, China)

  • Dongbin Pan

    (College of Construction Engineering, Jilin University, Changchun 130026, China
    Key Laboratory of Drilling and Exploitation Technology in Complex Conditions, Ministry of Natural Resources, Changchun 130026, China)

  • Lianghao Zhai

    (College of Construction Engineering, Jilin University, Changchun 130026, China
    Key Laboratory of Drilling and Exploitation Technology in Complex Conditions, Ministry of Natural Resources, Changchun 130026, China)

  • Shuai Gao

    (Institute of Marine Science and Technology, Shandong University, Qingdao 266000, China
    Shandong Provincial Bureau of Geology & Mineral Resources 801 Branch of Hydrogeology and Engineering Geology, Jinan 250014, China)

  • Ying Zhang

    (College of Construction Engineering, Jilin University, Changchun 130026, China
    Key Laboratory of Drilling and Exploitation Technology in Complex Conditions, Ministry of Natural Resources, Changchun 130026, China)

  • Chen Chen

    (College of Construction Engineering, Jilin University, Changchun 130026, China
    Key Laboratory of Drilling and Exploitation Technology in Complex Conditions, Ministry of Natural Resources, Changchun 130026, China)

Abstract

A horizontal well with hydraulic fractures is key to forming a fracture network in oil shale for the generated hydrocarbon flows. By considering the influence of anisotropic strength, a prediction model is proposed for fracture initiation by studying different fracture initiation modes (FIMs) in oil shale: failure of the intact rock matrix and of the bedding planes. Through a case study on Nong’an oil shale, the influences of wellbore trajectory and bedding planes on the fracture initiation pressure (FIP), location (FIL), and FIM were analyzed and the induced changes in wellbore trajectory design were concluded. The preferred angle between the wellbore axis and the minimum horizontal principal stress was the same of 90° or 270°, when the lowest required FIP corresponded to the failure of the intact rock matrix. However, when the angle corresponded to the failure of the bedding planes, the preferred direction of the wellbore axis was away from the fixed direction and not corresponding to the lowest required FIP due to the fracture morphology. The error between the theoretical and experimental results ranges from 7% to 9%. This research provides a framework for the design of horizontal wellbore trajectories in oil shale, for easier fracture initiation and more complex fracture networks.

Suggested Citation

  • Ying Zhu & Han Zhang & Dongbin Pan & Lianghao Zhai & Shuai Gao & Ying Zhang & Chen Chen, 2020. "A Case Study on the Optimal Design of the Horizontal Wellbore Trajectory for Hydraulic Fracturing in Nong’an Oil Shale," Energies, MDPI, vol. 13(1), pages 1-26, January.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:1:p:286-:d:305847
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/1/286/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/1/286/
    Download Restriction: no
    ---><---

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zhong, Xiuping & Pan, Dongbin & Zhu, Ying & Wang, Yafei & Zhai, Lianghao & Li, Xitong & Tu, Guigang & Chen, Chen, 2021. "Fracture network stimulation effect on hydrate development by depressurization combined with thermal stimulation using injection-production well patterns," Energy, Elsevier, vol. 228(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:1:p:286-:d:305847. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.