IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v12y2019i18p3407-d263894.html
   My bibliography  Save this article

Reaction Kinetics and Coreflooding Study of High-Temperature Carbonate Reservoir Stimulation Using GLDA in Seawater

Author

Listed:
  • Khaled Z. Abdelgawad

    (Petroleum Engineerig Department, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia)

  • Mohamed Mahmoud

    (Petroleum Engineerig Department, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia)

  • Salaheldin Elkatatny

    (Petroleum Engineerig Department, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia)

  • Abdulazeez Abdulraheem

    (Petroleum Engineerig Department, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia)

  • Shirish Patil

    (Petroleum Engineerig Department, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia)

Abstract

Well stimulation using hydrochloric acid (HCl) is a common practice in carbonate reservoirs to overcome formation damage in the near wellbore area. Using HCl for matrix acidizing has many limitations at high-temperature (HT) conditions, such as tubulars corrosion and face dissolution due to the fast reaction rate. Chelating agents, such as L-glutamic acid-N,N-diacetic acid (GLDA), are alternatives to HCl to overcome these problems. We studied the effect of diluting GLDA in seawater on the reaction kinetics with carbonate rocks under HT conditions at low pH (3.8). Results of the reaction of carbonate at 1000 psi and 150, 200, and 250 °F with GLDA prepared in both fresh and seawater, GLDA/DI and GLDA/SW, respectively, are presented. The reaction kinetics experiments were carried out in HT rotating disk apparatus (RDA) at rotational speeds ranging from 500 to 2000 revolutions per minute (RPM) at a fixed temperature. Indiana limestone and Austin chalk were used to studying the effect of rock facies on the reaction of GLDA with rock samples. In both GLDA/DI and GLDA/SW, the reaction regime of 20 wt% GLDA (3.8 pH) with Indiana limestone was mass transfer limited. The reaction rate and diffusion coefficient were highly dependent on the temperature. For Austin chalk, at 200 °F and 1000 psi the diffusion coefficient of GLDA/SW is an order of magnitude of its value with Indiana limestone using the same fluid. Diffusion coefficients were used to estimate the optimum injection rate for stimulating HT carbonate formation and compared with coreflooding results. The data presented in this paper will support the numerical simulation of the acid flow in carbonate reservoirs.

Suggested Citation

  • Khaled Z. Abdelgawad & Mohamed Mahmoud & Salaheldin Elkatatny & Abdulazeez Abdulraheem & Shirish Patil, 2019. "Reaction Kinetics and Coreflooding Study of High-Temperature Carbonate Reservoir Stimulation Using GLDA in Seawater," Energies, MDPI, vol. 12(18), pages 1-21, September.
  • Handle: RePEc:gam:jeners:v:12:y:2019:i:18:p:3407-:d:263894
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/12/18/3407/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/12/18/3407/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:12:y:2019:i:18:p:3407-:d:263894. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.