IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v10y2017i10p1558-d114424.html
   My bibliography  Save this article

Verification of the Performance of a Vertical Ground Heat Exchanger Applied to a Test House in Melbourne, Australia

Author

Listed:
  • Koon Beng Ooi

    (Faculty of Architecture, Building and Planning, Melbourne School of Design, The University of Melbourne, Buildings 133, Parkville, VIC 3010, Australia)

  • Masa Noguchi

    (Faculty of Architecture, Building and Planning, Melbourne School of Design, The University of Melbourne, Buildings 133, Parkville, VIC 3010, Australia)

Abstract

The ground heat exchanger is traditionally used as a heat source or sink for the heat pump that raises the temperature of water to about 50 °C to heat houses. However, in winter, the heating thermostat (temperature at which heating begins) in the Australian Nationwide House Energy Rating Scheme (NatHERS) is only 20 °C during daytime and 15 °C at night. In South-East Melbourne, the temperature at the bottom of a 50-meter-deep borehole has been recorded with an Emerson™ recorder at 17 °C. Melbourne has an annual average temperature of 15 °C, so the ground temperature increases by 2 °C per 50-m depth. A linear projection gives 23 °C at 200-m of depth, and as the average undisturbed temperature of the ground for a 400-m-deep vertical ground heat exchanger (VGHE). This study, by simulation and experimentation, aims to verify that the circulation of water in the VGHE’s U-tube to low-temperature radiators (LTRs) could heat a house to thermal comfort. A literature review is included in the introduction. A simulation, using a model of a 60-m 2 experimental house, shows that the daytime circulation of water in this VGHE/LTR-on-opposite-walls system during the 8-month cold half of the year, heats the indoors to NatHERS settings. Simulation for the cold half shows that this VGHE-LTR system could cool the indoors. Instead, a fan creating a cooling sensation of up to 4 °C is used so that the VGHE is available for the regeneration of heat extracted from the ground during the cold portion. Simulations for this hot portion show that a 3.4-m 2 flat plate solar collector can collect more than twice the heat extracted from the ground in the cold portion. Thus, it can thus replenish the ground heat extracted for houses double the size of this 60-m 2 experimental house. Therefore, ground heat is sustainable for family-size homes. Since no heat pump is used, the cost of VGHE-LTR systems could be comparable to systems using the ground source heat pump. Water circulation pumps and fans require low power that can be supplied by photovoltaic thermal (PVT). The EnergyPlus™ v8.7 object modeling the PVT requires user-defined efficiencies, so a PVT will be tested in the experimental house.

Suggested Citation

  • Koon Beng Ooi & Masa Noguchi, 2017. "Verification of the Performance of a Vertical Ground Heat Exchanger Applied to a Test House in Melbourne, Australia," Energies, MDPI, vol. 10(10), pages 1-11, October.
    • Handle: RePEc:gam:jeners:v:10:y:2017:i:10:p:1558-:d:114424
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/10/10/1558/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/10/10/1558/
    Download Restriction: no
    ---><---

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Grzegorz Nawalany & Paweł Sokołowski, 2019. "Building–Soil Thermal Interaction: A Case Study," Energies, MDPI, vol. 12(15), pages 1-12, July.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:10:y:2017:i:10:p:1558-:d:114424. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.