IDEAS home Printed from https://ideas.repec.org/a/gam/jagris/v15y2025i8p831-d1632957.html
   My bibliography  Save this article

Design and Simulation of Chinese Cabbage Harvester

Author

Listed:
  • Simo Liu

    (Department of Agricultural Mechanization Engineering, College of Engineering, Shenyang Agricultural University, Shenyang 110866, China)

  • Xuhui Yang

    (Department of Agricultural Mechanization Engineering, College of Engineering, Shenyang Agricultural University, Shenyang 110866, China)

  • Zhe Zhang

    (Department of Agricultural Mechanization Engineering, College of Engineering, Shenyang Agricultural University, Shenyang 110866, China)

  • Jianing Xu

    (Department of Agricultural Mechanization Engineering, College of Engineering, Shenyang Agricultural University, Shenyang 110866, China)

  • Ping Zhao

    (Department of Agricultural Mechanization Engineering, College of Engineering, Shenyang Agricultural University, Shenyang 110866, China
    Key Laboratory of Horticultural Equipment, Ministry of Agriculture and Rural Affairs, Shenyang 110866, China)

  • Subo Tian

    (Department of Agricultural Mechanization Engineering, College of Engineering, Shenyang Agricultural University, Shenyang 110866, China
    Key Laboratory of Horticultural Equipment, Ministry of Agriculture and Rural Affairs, Shenyang 110866, China)

  • Lihua Wei

    (Department of Agricultural Mechanization Engineering, College of Engineering, Shenyang Agricultural University, Shenyang 110866, China)

  • Xiaofeng Ning

    (Department of Agricultural Mechanization Engineering, College of Engineering, Shenyang Agricultural University, Shenyang 110866, China
    Key Laboratory of Horticultural Equipment, Ministry of Agriculture and Rural Affairs, Shenyang 110866, China)

Abstract

In view of the problems of low work efficiency and high operating costs caused by manual harvesting of Chinese cabbage in China, in this study, a Chinese cabbage harvester with agronomic integrity was designed. The harvester is mainly composed of a crawler chassis, a drawing device, a flexible clamping device, a cutting device, and a horizontal delivery device. Firstly, physical properties of Chinese cabbage such as diameter, plant height, weight, and drawing rate of Chinese cabbage were measured and analyzed to provide necessary basic data for the design of the harvester. Secondly, simulation tests were conducted on the Chinese cabbage harvesting process; a 3D model of Chinese cabbage using SolidWorks 2022 was established and filled with particles using the three-layer stacking method. At the same time, SolidWorks was applied to simplify the model of the Chinese cabbage harvester. The belt of the machine model was set as a flexible body through RecurDyn 2023 software and coupled with EDEM 2022 for simulation analysis. Based on single factor tests, the BBD model was applied to conduct multi-factor response surface analysis on the above factor levels. The optimal working conditions of the harvester were obtained as follows: the rotating speed of the cutting device was 207.85 r/min, the rotating speed of the flexible clamping conveyor belt was 165.51 r/min, the rotating speed of the drawing device was 102.38 r/min, and the machine walking speed was 1.37 km/h. The qualified rate of Chinese cabbage harvesting was the highest, achieving a maximum theoretical value of 97.91%. Field validation tests were conducted on the designed Chinese cabbage harvester. Based on the actual operating conditions of the Chinese cabbage harvester and the simulated operating parameters, the optimal parameter combination was finally determined as follows: rotating speed of the root cutting device was 200 r/min, rotating speed of the flexible clamping conveyor belt was 160 r/min, rotating speed of the drawing device was 100 r/min, and machine walking speed was 1.4 km/h, respectively. Through field verification tests, the highest qualified rate of Chinese cabbage harvesting reached 93.19%, showing a good harvesting effect, which approximates the simulated optimal qualified rate of 97.91%, meeting the mechanized harvesting demand of Chinese cabbage. This study provides reference to the further design and development of Chinese cabbage harvesters in the future.

Suggested Citation

  • Simo Liu & Xuhui Yang & Zhe Zhang & Jianing Xu & Ping Zhao & Subo Tian & Lihua Wei & Xiaofeng Ning, 2025. "Design and Simulation of Chinese Cabbage Harvester," Agriculture, MDPI, vol. 15(8), pages 1-22, April.
    • Handle: RePEc:gam:jagris:v:15:y:2025:i:8:p:831-:d:1632957
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2077-0472/15/8/831/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2077-0472/15/8/831/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jagris:v:15:y:2025:i:8:p:831-:d:1632957. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.