Author
Listed:
- Wenxin Li
(School of Mechanical and Automotive Engineering, Qingdao University of Technology, Qingdao 266520, China)
- Hao Yin
(School of Mechanical and Automotive Engineering, Qingdao University of Technology, Qingdao 266520, China)
- Yuhuan Li
(School of Mechanical and Automotive Engineering, Qingdao University of Technology, Qingdao 266520, China)
- Xiaohong Liu
(College of Mechanical and Electrical Engineering, Qingdao Agricultural University, Qingdao 266109, China)
- Jiang Liu
(School of Mechanical and Automotive Engineering, Qingdao University of Technology, Qingdao 266520, China)
- Han Wang
(College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan 030024, China)
Abstract
In China, most blueberry varieties are characterized by tightly clustered fruits, which pose challenges for achieving precise and non-destructive automated harvesting. This complexity limits the design of robots for this task. Therefore, this paper proposes adding a jetting step during harvesting to separate fruit clusters and increase the operational space for mechanical claws. First, a combined approach of flow field analysis and pressure-sensitive experiments was employed to establish design criteria for the number, diameter, and inclination angle parameters of two types of nozzles: flat tip and round tip. Furthermore, fruit was introduced, and a fluid–structure coupling method was employed to calculate the deformation of fruit stems. Simultaneously, a mechanical analysis was conducted to quantify the relationship between jet characteristics and separation gaps. Simulation and pressure-sensitive experiments show that as the number of holes increases and their diameter decreases, the nozzle’s convergence becomes stronger. The greater the inclination angle of the circular nozzle holes, the more the gas diverges. The analysis of the output characteristics of the working section indicates that the 8-hole 40° round nozzle is the optimal solution. At an air compressor working pressure of 0.5 MPa, force analysis and simulation results both show that it can increase the picking space for the mechanical claw by about 5–7 mm without damaging the blueberries in the jet area. The final field experiments show that the mean distance for Type I (mature fruit) is 5.41 mm, for Type II (red fruit) is 6.42 mm, and for Type III (green fruit) is 5.43 mm. The short and curved stems of the green fruit are less effective, but the minimum distance of 4.71 mm is greater than the claw wall thickness, meeting the design requirements.
Suggested Citation
Wenxin Li & Hao Yin & Yuhuan Li & Xiaohong Liu & Jiang Liu & Han Wang, 2024.
"Research on the Jet Distance Enhancement Device for Blueberry Harvesting Robots Based on the Dual-Ring Model,"
Agriculture, MDPI, vol. 14(9), pages 1-22, September.
Handle:
RePEc:gam:jagris:v:14:y:2024:i:9:p:1563-:d:1474598
Download full text from publisher
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jagris:v:14:y:2024:i:9:p:1563-:d:1474598. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.