IDEAS home Printed from https://ideas.repec.org/a/eee/transe/v188y2024ics1366554524002096.html
   My bibliography  Save this article

Effects of information asymmetry on green advertising for remanufacturing within a closed-loop supply chain

Author

Listed:
  • Zhao, Senlin
  • Wang, Mengxiang
  • Zhu, Qinghua
  • Zhou, Qin
  • Mao, Rongrong

Abstract

Manufacturers invest in Green Advertising for Remanufacturing (GAR) to attract consumers by promoting the eco-friendly benefits of their remanufacturing. Despite this, the production of remanufactured products is often influenced by Third-Party Collectors (3PCs) which handle the collection of used products. Unfortunately, market responsiveness to GAR levels is undisclosed due to proprietary information, which leaves 3PCs to unreasonably set pricing and collection quantities, potentially leading to profit loss. To explore how a two-part tariff (TPT) contract menu facilitates 3PCs in acquiring information regarding the manufacturer’s GAR effectiveness, a closed-loop supply chain comprising one manufacturer and one 3PC is taken into consideration. The optimal decisions are analyzed in three distinct decision-making scenarios: the centralized scenario, the complete information scenario, and the asymmetric information scenario. The research findings suggest that in the presence of information asymmetry, manufacturers with high GAR effectiveness (H-type manufacturers) are inclined to masquerade as manufacturers with low GAR effectiveness (L-type manufacturers). Consequently, H-type manufacturers gain additional profits due to information asymmetry. However, for the 3PC, information asymmetry leads to reduced expected profit when the manufacturer has high GAR effectiveness and increased expected profit when the manufacturer has low GAR effectiveness. Finally, our analysis demonstrates that information asymmetry does not consistently hurt consumer surplus.

Suggested Citation

  • Zhao, Senlin & Wang, Mengxiang & Zhu, Qinghua & Zhou, Qin & Mao, Rongrong, 2024. "Effects of information asymmetry on green advertising for remanufacturing within a closed-loop supply chain," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 188(C).
    • Handle: RePEc:eee:transe:v:188:y:2024:i:c:s1366554524002096
    DOI: 10.1016/j.tre.2024.103618
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1366554524002096
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.tre.2024.103618?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Baojun Jiang & Lin Tian & Yifan Xu & Fuqiang Zhang, 2016. "To Share or Not to Share: Demand Forecast Sharing in a Distribution Channel," Marketing Science, INFORMS, vol. 35(5), pages 800-809, September.
    2. Zhou, Qin & Meng, Chao & Yuen, Kum Fai, 2020. "The impact of secondary market competition on refurbishing authorization strategies," International Journal of Production Economics, Elsevier, vol. 228(C).
    3. Gal Raz & Gilvan C. Souza, 2018. "Recycling as a Strategic Supply Source," Production and Operations Management, Production and Operations Management Society, vol. 27(5), pages 902-916, May.
    4. Atalay Atasu & Charles J. Corbett & Ximin (Natalie) Huang & L. Beril Toktay, 2020. "Sustainable Operations Management Through the Perspective of Manufacturing & Service Operations Management," Manufacturing & Service Operations Management, INFORMS, vol. 22(1), pages 146-157, January.
    5. Govindan, Kannan, 2024. "Unlocking the potential of quality as a core marketing strategy in remanufactured circular products: A machine learning enabled multi-theoretical perspective," International Journal of Production Economics, Elsevier, vol. 269(C).
    6. Atalay Atasu & Miklos Sarvary & Luk N. Van Wassenhove, 2008. "Remanufacturing as a Marketing Strategy," Management Science, INFORMS, vol. 54(10), pages 1731-1746, October.
    7. Reimann, Marc & Xiong, Yu & Zhou, Yu, 2019. "Managing a closed-loop supply chain with process innovation for remanufacturing," European Journal of Operational Research, Elsevier, vol. 276(2), pages 510-518.
    8. Baliga, Sandeep & Maskin, Eric, 2003. "Mechanism design for the environment," Handbook of Environmental Economics, in: K. G. Mäler & J. R. Vincent (ed.), Handbook of Environmental Economics, edition 1, volume 1, chapter 7, pages 305-324, Elsevier.
    9. Li, Wei & Sun, Hui & Dong, Hao & Gan, Yuqin & Koh, Lenny, 2023. "Outsourcing decision-making in global remanufacturing supply chains: The impact of tax and tariff regulations," European Journal of Operational Research, Elsevier, vol. 304(3), pages 997-1010.
    10. Ni, Jian & Zhao, Jun & Chu, Lap Keung, 2021. "Supply contracting and process innovation in a dynamic supply chain with information asymmetry," European Journal of Operational Research, Elsevier, vol. 288(2), pages 552-562.
    11. Özalp Özer & Wei Wei, 2006. "Strategic Commitments for an Optimal Capacity Decision Under Asymmetric Forecast Information," Management Science, INFORMS, vol. 52(8), pages 1238-1257, August.
    12. Yang, Lei & Hu, Yijuan & Huang, Lijuan, 2020. "Collecting mode selection in a remanufacturing supply chain under cap-and-trade regulation," European Journal of Operational Research, Elsevier, vol. 287(2), pages 480-496.
    13. Zhao, Senlin & You, Zhuangzhuang & Zhu, Qinghua, 2022. "Effects of asymmetric cost information on collection outsourcing of used products for remanufacturing," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 162(C).
    14. Cao, Jian & Wu, Sisi & Kumar, Sanjay, 2023. "Recovering and remanufacturing to fulfill EPR regulation in the presence of secondary market," International Journal of Production Economics, Elsevier, vol. 263(C).
    15. Aseem Prakash, 2002. "Green marketing, public policy and managerial strategies," Business Strategy and the Environment, Wiley Blackwell, vol. 11(5), pages 285-297, September.
    16. Walter Y. Oi, 1971. "A Disneyland Dilemma: Two-Part Tariffs for a Mickey Mouse Monopoly," The Quarterly Journal of Economics, President and Fellows of Harvard College, vol. 85(1), pages 77-96.
    17. Alegoz, Mehmet & Kaya, Onur & Bayindir, Z. Pelin, 2021. "A comparison of pure manufacturing and hybrid manufacturing–remanufacturing systems under carbon tax policy," European Journal of Operational Research, Elsevier, vol. 294(1), pages 161-173.
    18. Hong, Xianpei & Xu, Lei & Du, Peng & Wang, Wenjuan, 2015. "Joint advertising, pricing and collection decisions in a closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 167(C), pages 12-22.
    19. Xia, Liangjie & Li, Kang & Wang, Jun & Xia, Yi & Qin, Juanjuan, 2024. "Carbon emission reduction and precision marketing decisions of a platform supply chain," International Journal of Production Economics, Elsevier, vol. 268(C).
    20. Pazoki, Mostafa & Samarghandi, Hamed, 2020. "Take-back regulation: Remanufacturing or Eco-design?," International Journal of Production Economics, Elsevier, vol. 227(C).
    21. Yao Chen & Fangruo Chen, 2019. "On the Competition between Two Modes of Product Recovery: Remanufacturing and Refurbishing," Production and Operations Management, Production and Operations Management Society, vol. 28(12), pages 2983-3001, December.
    22. Xu, Xiaoping & Yan, Luling & Choi, Tsan-Ming & Cheng, T.C.E., 2023. "When Is It Wise to Use Blockchain for Platform Operations with Remanufacturing?," European Journal of Operational Research, Elsevier, vol. 309(3), pages 1073-1090.
    23. R. Canan Savaskan & Luk N. Van Wassenhove, 2006. "Reverse Channel Design: The Case of Competing Retailers," Management Science, INFORMS, vol. 52(1), pages 1-14, January.
    24. Wang, Wenbin & Zhang, Yu & Zhang, Kai & Bai, Tuo & Shang, Jennifer, 2015. "Reward–penalty mechanism for closed-loop supply chains under responsibility-sharing and different power structures," International Journal of Production Economics, Elsevier, vol. 170(PA), pages 178-190.
    25. Nengmin Wang & Jizhou Lu & Gengzhong Feng & Yungao Ma & Huigang Liang, 2016. "The bullwhip effect on inventory under different information sharing settings based on price-sensitive demand," International Journal of Production Research, Taylor & Francis Journals, vol. 54(13), pages 4043-4064, July.
    26. Huang, Song & Wang, Yun & Zhang, Xianmei, 2023. "Contracting with countervailing incentives under asymmetric cost information in a dual-channel supply chain," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 171(C).
    27. R. Canan Savaskan & Shantanu Bhattacharya & Luk N. Van Wassenhove, 2004. "Closed-Loop Supply Chain Models with Product Remanufacturing," Management Science, INFORMS, vol. 50(2), pages 239-252, February.
    28. Xiang Chu & Qiuyan Zhong & Xue Li, 2018. "Reverse channel selection decisions with a joint third-party recycler," International Journal of Production Research, Taylor & Francis Journals, vol. 56(18), pages 5969-5981, September.
    29. Ma, Peng & Shang, Jennifer & Wang, Haiyan, 2017. "Enhancing corporate social responsibility: Contract design under information asymmetry," Omega, Elsevier, vol. 67(C), pages 19-30.
    30. Lan Wang & Gangshu (George) Cai & Andy A. Tsay & Asoo J. Vakharia, 2017. "Design of the Reverse Channel for Remanufacturing: Must Profit-Maximization Harm the Environment?," Production and Operations Management, Production and Operations Management Society, vol. 26(8), pages 1585-1603, August.
    31. Panda, Shibaji & Modak, Nikunja Mohan & Cárdenas-Barrón, Leopoldo Eduardo, 2017. "Coordinating a socially responsible closed-loop supply chain with product recycling," International Journal of Production Economics, Elsevier, vol. 188(C), pages 11-21.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhou, Qin & Meng, Chao & Yuen, Kum Fai, 2021. "Remanufacturing authorization strategy for competition among OEM, authorized remanufacturer, and unauthorized remanufacturer," International Journal of Production Economics, Elsevier, vol. 242(C).
    2. Ehsan Shekarian & Simme Douwe Flapper, 2021. "Analyzing the Structure of Closed-Loop Supply Chains: A Game Theory Perspective," Sustainability, MDPI, vol. 13(3), pages 1-32, January.
    3. Li, Wei & Tian, Ruimiao & Chen, Jing, 2024. "Original equipment manufacturer with remanufacturing: Outsourcing strategy and organizational structure," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 187(C).
    4. Luo, Li & Shan, Renbang & Xiang, Jie, 2024. "The government intervention effectiveness in promoting remanufacturing: Subsidy or remanufacturing target?," Socio-Economic Planning Sciences, Elsevier, vol. 92(C).
    5. Li, Wei & Wang, Peilin & Cheng, Wencheng & Nie, Kai, 2024. "Transnational remanufacturing decisions under carbon taxes and tariffs," European Journal of Operational Research, Elsevier, vol. 312(1), pages 150-163.
    6. Zhou, Qin & Meng, Chao & Sheu, Jiuh-Biing & Yuen, Kum Fai, 2023. "Remanufacturing mode and strategic decision: A game-theoretic approach," International Journal of Production Economics, Elsevier, vol. 260(C).
    7. Yang, Lei & Hu, Yijuan & Huang, Lijuan, 2020. "Collecting mode selection in a remanufacturing supply chain under cap-and-trade regulation," European Journal of Operational Research, Elsevier, vol. 287(2), pages 480-496.
    8. Chen, Jianxin & Hou, Rui & Xiao, Lu & Zhang, Tonghua & Zhou, Yongwu, 2023. "Dynamic corporate social responsibility adjustment strategies of a closed-loop supply chain with fairness concerns and supply chain financing," Chaos, Solitons & Fractals, Elsevier, vol. 168(C).
    9. Liu, Jing & Xia, Senmao & Wang, Zhaoxing & Nie, Jiajia & Ameen, Nisreen & Yan, Cheng & Lim, Ming K., 2023. "How to balance economic profits and environmental protection: The impacts of cash hedging on remanufacturing firms," International Journal of Production Economics, Elsevier, vol. 258(C).
    10. Zhou, Tao & Li, Kai, 2024. "Designing manufacturer’s new product technology for a closed-loop supply chain with consumer context effect," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 188(C).
    11. Zhao, Senlin & You, Zhuangzhuang & Zhu, Qinghua, 2021. "Quality choice for product recovery considering a trade-in program and third-party remanufacturing competition," International Journal of Production Economics, Elsevier, vol. 240(C).
    12. Dexiang Yang & Qin Yang & Lei Zhang, 2023. "Operational Decisions on Remanufacturing under the Product Innovation Race," Sustainability, MDPI, vol. 15(6), pages 1-18, March.
    13. Cai, Ya-Jun & Choi, Tsan-Ming & Zhang, Ting, 2022. "Commercial used apparel collection operations in retail supply chains," European Journal of Operational Research, Elsevier, vol. 298(1), pages 169-181.
    14. Zhou, Yongyi & Zhang, Yulin & Wahab, M.I.M. & Goh, Mark, 2023. "Channel leadership and performance for a closed-loop supply chain considering competition," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 175(C).
    15. Framinan, Jose M., 2024. "An analysis of the supply chain dynamics of remanufacturing with multiple collectors," International Journal of Production Economics, Elsevier, vol. 267(C).
    16. Jalali, Hamed & Ansaripoor, Amir H. & De Giovanni, Pietro, 2020. "Closed-loop supply chains with complementary products," International Journal of Production Economics, Elsevier, vol. 229(C).
    17. Wang, Qifei & Hong, Xianpei & Gong, Yeming (Yale) & Chen, Wanying (Amanda), 2020. "Collusion or Not: The optimal choice of competing retailers in a closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 225(C).
    18. Zhou, Yu & Xiong, Yu & Jin, Minyue, 2021. "Less is more: Consumer education in a closed-loop supply chain with remanufacturing," Omega, Elsevier, vol. 101(C).
    19. Zhang, Abraham & Wang, Jason X. & Farooque, Muhammad & Wang, Yulan & Choi, Tsan-Ming, 2021. "Multi-dimensional circular supply chain management: A comparative review of the state-of-the-art practices and research," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 155(C).
    20. Yanli Fang & Zhuoyi Ren & Fang Yang, 2023. "The Impact of Carbon Allowance Allocation Rules on Remanufacturing Decisions in a Closed-Loop Supply Chain," Mathematics, MDPI, vol. 11(13), pages 1-24, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:transe:v:188:y:2024:i:c:s1366554524002096. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600244/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.