IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v25y2002i4p585-590.html
   My bibliography  Save this article

The optoelectronic properties of CdSe:Cu photoconductive detector

Author

Listed:
  • Al-Ani, S.K.J.
  • Mohammed, H.H.
  • Al-Fwade, E.M.N.

Abstract

Photoconductive CdSe doped with (1–5 wt%) of Cu was fabricated using the vacuum evaporation technique for thin-film preparation followed by vacuum annealing at 350°C under an argon environment for doping with copper. The electrical and detection properties as a function of Cu content were studied. It was found that the gain coefficient was increased with an increase in the Cu impurity concentration and better results were obtained for a CdSe:Cu detector of 5 wt% concentration, which showed a gain coefficient of up to 8.87×103 for white illumination ∼1000 Lux. This value is much greater than the published value for pure CdSe film, possibly due to the sensitizing action of Cu centers. Additional weak but well resolved features were observed in the high-energy region of the curve depicting gain coefficients as a function of wavelength characteristics. These peaks were attributed to the 3D transition of Cu from deep levels in the valence band.

Suggested Citation

  • Al-Ani, S.K.J. & Mohammed, H.H. & Al-Fwade, E.M.N., 2002. "The optoelectronic properties of CdSe:Cu photoconductive detector," Renewable Energy, Elsevier, vol. 25(4), pages 585-590.
  • Handle: RePEc:eee:renene:v:25:y:2002:i:4:p:585-590
    DOI: 10.1016/S0960-1481(01)00088-X
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S096014810100088X
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/S0960-1481(01)00088-X?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:25:y:2002:i:4:p:585-590. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.