IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v36y2011i7p4518-4523.html
   My bibliography  Save this article

Ethylene separation by feed-splitting from light gases

Author

Listed:
  • Salerno, Daniel
  • Arellano-Garcia, Harvey
  • Wozny, Günter

Abstract

Separation of ethylene from light gas mixture is one of the most energy intensive separations in petrochemical processes, which uses distillation columns up to 100 m tall and containing over 100 trays due to very small differences in the relative volatilities and very large reflux ratios and also due to the need for sub-ambient temperatures. In recognition of these costs, several attempts have been made in the past to develop processes with less energy and equipment costs. In distillation columns with condenser temperatures significantly below room temperature, such as in ethylene separation towers, it is essential to minimize the expensive energy requirements of the refrigeration cycle that produces the tower reflux. In this work, a solution has been found by expanding the gaseous distillate to decrease its temperature. Moreover, additional solutions applied to conventional ethylene fractionation columns have been implemented here in order to study this behavior. In this contribution, an outlet stream of an Oxidative Coupling of Methane (OCM) reactor, which has been previously stripped of its CO2 content, is also introduced in a demethanizer tower to remove almost all of its CH4 content before entering the ethylene fractionating column. Then, it is cooled exchanging its heat with the distillate stream of the ethylene tower, warming the distillate. The main goal is to reduce the condenser heat duty. This objective is achieved reducing a significant amount of heat required by the condenser, maintaining the mandatory product purity. Due to this improvement, it was also possible to reduce the reboiler heat in almost the same percentage amount that is achieved with the condenser. In addition, the reflux of ethylene column decreases. The sensitivity analysis and the corresponding simulations results will be discussed in order to show the efficiency of the presented approach. These results have also been used for the design of the pilot plant which is now being built at our department.

Suggested Citation

  • Salerno, Daniel & Arellano-Garcia, Harvey & Wozny, Günter, 2011. "Ethylene separation by feed-splitting from light gases," Energy, Elsevier, vol. 36(7), pages 4518-4523.
    • Handle: RePEc:eee:energy:v:36:y:2011:i:7:p:4518-4523
    DOI: 10.1016/j.energy.2011.03.064
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544211002325
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2011.03.064?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Evangelos Delikonstantis & Marco Scapinello & Georgios D. Stefanidis, 2017. "Investigating the Plasma-Assisted and Thermal Catalytic Dry Methane Reforming for Syngas Production: Process Design, Simulation and Evaluation," Energies, MDPI, vol. 10(9), pages 1-27, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:36:y:2011:i:7:p:4518-4523. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.