IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v319y2025ics0360544225006528.html
   My bibliography  Save this article

The effect of the number of tubes on the charging and discharging performances of a novel bio-nPCM within a vertical multi-tube TES system

Author

Listed:
  • Abdolahimoghadam, Mohammad
  • Rahimi, Masoud

Abstract

Today, integrating phase change materials (PCMs) with renewable energy systems has become a prevalent strategy for enhancing sustainability. Thermal energy storage (TES) systems that contain PCMs, like any other equipment, need to be optimized and increase efficiency. To address this, this project investigated a vertical multi-tube configuration of a TES system employing a biological and nano-based PCM (bio-nPCM) composed of coconut oil and beeswax enhanced with graphene-copper (Gr-Cu) hybrid nanoparticles. This research provides insights into the interplay between material properties, system geometry, and heat transfer mechanisms in bio-nPCM-based TES systems, contributing to the design and optimization of such systems. A three-dimensional model of a one-tube TES system was validated with an experimental setup and subsequently developed for two-, three-, and four-tube TES systems. The findings demonstrated that employing multi-tube systems, specifically two, three, and four tubes, instead of a single-tube system, led to increased bio-PCM melting rates by 33.3 %, 49.01 %, and 55.71 % respectively. Furthermore, the combined use of 2 wt% Gr-Cu hybrid nanoparticles and four tubes resulted in an 80.25 % improvement in melting rate compared to the single-tube system with bio-PCM. Additionally, the presence of GNP in bio-PCM maximally heightened the melting rate by 5.05 %. Contour analysis revealed a substantial augmentation in natural convection flow, reaching up to 94.43 %, with an escalation in the number of tubes in the system. Concerning solidification, it was observed that in multi-tube systems containing bio-PCM, the utilization of three tubes instead of one resulted in a 57.07 % improvement in the solidification rate, representing the most significant enhancement. However, the performance of the four-tube system was not as effective as that of the three-tube system when employing bio-PCM. Conversely, the integration of four tubes and 2 wt% Gr-Cu reduced the solidification time by 74.28 %, surpassing the effectiveness of the three-tube system containing this nanoparticle by 5.12 %.

Suggested Citation

  • Abdolahimoghadam, Mohammad & Rahimi, Masoud, 2025. "The effect of the number of tubes on the charging and discharging performances of a novel bio-nPCM within a vertical multi-tube TES system," Energy, Elsevier, vol. 319(C).
    • Handle: RePEc:eee:energy:v:319:y:2025:i:c:s0360544225006528
    DOI: 10.1016/j.energy.2025.135010
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544225006528
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2025.135010?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:319:y:2025:i:c:s0360544225006528. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.