IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v263y2023ipes0360544222028560.html
   My bibliography  Save this article

Superstructure optimization of absorption chillers integrated with a large internal combustion engine for waste heat recovery and repowering applications: Thermodynamic and economic assessments

Author

Listed:
  • Chun, André
  • Donatelli, João Luiz Marcon
  • Santos, José Joaquim Conceição Soares
  • Zabeu, Clayton Barcelos
  • Carvalho, Monica

Abstract

Internal combustion engines can suffer derating due the knocking phenomenon, which is caused by harsh climate conditions. In addition, large internal combustion engines release considerable heat to the environment through the cooling water and exhaust gas systems. This work is part of an R&D project, sponsored by a Brazilian thermal power plant, in which waste heat recovery and intake air conditioning are explored. The major contribution is the development of a superstructure modelling based on absorption systems integrated with one engine, permitting to determine the best chiller that should be installed at the power plant. Genetic algorithm is used to optimize the complex system, presenting as an optimal result a single-effect chiller powered by the engine’s cooling water, which is preheated at an exhaust gas heat exchanger. The benefits are demonstrated in terms of additional electric power output (1.47 MW ≈17.2%) and reduction of brake specific fuel consumption (2.4 g kWh−1≈1.44%) over the engine’s performance on site (8.54 MW and 167.06 g kWh−1). Moreover, 37.35% of electrical energy savings are achieved at the radiator after the optimization. The optimal profit is 30.7 US$ h−1 with a Levelized Cost of Energy of 19.2 US$ MWh−1. The investment risk requires a payback under three years. The exergy analysis revealed that the absorption chiller is recovering 391.55 kW of wasted exergy, which is 1.67% of the total amount of chemical exergy from the fuel and 11.33% of the total amount of available exergy in the waste streams (cooling water and exhaust gases).

Suggested Citation

  • Chun, André & Donatelli, João Luiz Marcon & Santos, José Joaquim Conceição Soares & Zabeu, Clayton Barcelos & Carvalho, Monica, 2023. "Superstructure optimization of absorption chillers integrated with a large internal combustion engine for waste heat recovery and repowering applications: Thermodynamic and economic assessments," Energy, Elsevier, vol. 263(PE).
    • Handle: RePEc:eee:energy:v:263:y:2023:i:pe:s0360544222028560
    DOI: 10.1016/j.energy.2022.125970
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222028560
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.125970?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Javad Adeli & Mohammadreza Niknejadi & Davood Toghraie, 2020. "Full repowering of an existing fossil fuel steam power plant in terms of energy, exergy, and environmen for efficiency improvement and sustainable development," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 22(6), pages 5965-5999, August.
    2. Voll, Philip & Lampe, Matthias & Wrobel, Gregor & Bardow, André, 2012. "Superstructure-free synthesis and optimization of distributed industrial energy supply systems," Energy, Elsevier, vol. 45(1), pages 424-435.
    3. Oluleye, Gbemi & Jobson, Megan & Smith, Robin, 2015. "A hierarchical approach for evaluating and selecting waste heat utilization opportunities," Energy, Elsevier, vol. 90(P1), pages 5-23.
    4. Wang, Ligang & Voll, Philip & Lampe, Matthias & Yang, Yongping & Bardow, André, 2015. "Superstructure-free synthesis and optimization of thermal power plants," Energy, Elsevier, vol. 91(C), pages 700-711.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Sakalis, George N. & Frangopoulos, Christos A., 2018. "Intertemporal optimization of synthesis, design and operation of integrated energy systems of ships: General method and application on a system with Diesel main engines," Applied Energy, Elsevier, vol. 226(C), pages 991-1008.
    2. Lazzaretto, Andrea & Manente, Giovanni & Toffolo, Andrea, 2018. "SYNTHSEP: A general methodology for the synthesis of energy system configurations beyond superstructures," Energy, Elsevier, vol. 147(C), pages 924-949.
    3. Lin, Shan & Zhao, Li & Deng, Shuai & Zhao, Dongpeng & Wang, Wei & Chen, Mengchao, 2020. "Intelligent collaborative attainment of structure configuration and fluid selection for the Organic Rankine cycle," Applied Energy, Elsevier, vol. 264(C).
    4. Wang, Ligang & Lampe, Matthias & Voll, Philip & Yang, Yongping & Bardow, André, 2016. "Multi-objective superstructure-free synthesis and optimization of thermal power plants," Energy, Elsevier, vol. 116(P1), pages 1104-1116.
    5. Ligang Wang & Zhiping Yang & Shivom Sharma & Alberto Mian & Tzu-En Lin & George Tsatsaronis & François Maréchal & Yongping Yang, 2018. "A Review of Evaluation, Optimization and Synthesis of Energy Systems: Methodology and Application to Thermal Power Plants," Energies, MDPI, vol. 12(1), pages 1-53, December.
    6. Halmschlager, Daniel & Beck, Anton & Knöttner, Sophie & Koller, Martin & Hofmann, René, 2022. "Combined optimization for retrofitting of heat recovery and thermal energy supply in industrial systems," Applied Energy, Elsevier, vol. 305(C).
    7. Capuder, Tomislav & Mancarella, Pierluigi, 2014. "Techno-economic and environmental modelling and optimization of flexible distributed multi-generation options," Energy, Elsevier, vol. 71(C), pages 516-533.
    8. Bertrand, Alexandre & Mian, Alberto & Kantor, Ivan & Aggoune, Riad & Maréchal, François, 2019. "Regional waste heat valorisation: A mixed integer linear programming method for energy service companies," Energy, Elsevier, vol. 167(C), pages 454-468.
    9. Zhao, Dongpeng & Deng, Shuai & Zhao, Li & Xu, Weicong & Zhao, Ruikai & Wang, Wei, 2020. "From 1 to N: A computer-aided case study of thermodynamic cycle construction based on thermodynamic process combination," Energy, Elsevier, vol. 210(C).
    10. Adriana Reyes-Lúa & Julian Straus & Vidar T. Skjervold & Goran Durakovic & Tom Ståle Nordtvedt, 2021. "A Novel Concept for Sustainable Food Production Utilizing Low Temperature Industrial Surplus Heat," Sustainability, MDPI, vol. 13(17), pages 1-23, August.
    11. Kler, Aleksandr M. & Zharkov, Pavel V. & Epishkin, Nikolai O., 2019. "Parametric optimization of supercritical power plants using gradient methods," Energy, Elsevier, vol. 189(C).
    12. Lythcke-Jørgensen, Christoffer & Ensinas, Adriano Viana & Münster, Marie & Haglind, Fredrik, 2016. "A methodology for designing flexible multi-generation systems," Energy, Elsevier, vol. 110(C), pages 34-54.
    13. Jennings, Mark & Fisk, David & Shah, Nilay, 2014. "Modelling and optimization of retrofitting residential energy systems at the urban scale," Energy, Elsevier, vol. 64(C), pages 220-233.
    14. Chandrakant Nikam, Keval & Jathar, Laxmikant & Shelare, Sagar Dnyaneshwar & Shahapurkar, Kiran & Dambhare, Sunil & Soudagar, Manzoore Elahi M. & Mubarak, Nabisab Mujawar & Ahamad, Tansir & Kalam, M.A., 2023. "Parametric analysis and optimization of 660 MW supercritical power plant," Energy, Elsevier, vol. 280(C).
    15. Voll, Philip & Klaffke, Carsten & Hennen, Maike & Bardow, André, 2013. "Automated superstructure-based synthesis and optimization of distributed energy supply systems," Energy, Elsevier, vol. 50(C), pages 374-388.
    16. Kiss, Anton A. & Smith, Robin, 2020. "Rethinking energy use in distillation processes for a more sustainable chemical industry," Energy, Elsevier, vol. 203(C).
    17. Wang, Ligang & Pérez-Fortes, Mar & Madi, Hossein & Diethelm, Stefan & herle, Jan Van & Maréchal, François, 2018. "Optimal design of solid-oxide electrolyzer based power-to-methane systems: A comprehensive comparison between steam electrolysis and co-electrolysis," Applied Energy, Elsevier, vol. 211(C), pages 1060-1079.
    18. Adamantios G. Papatsounis & Pantelis N. Botsaris, 2022. "Improved Structural Local Thermal Energy Planning Based on Prosumer Profile: Part B," Energies, MDPI, vol. 15(20), pages 1-24, October.
    19. Oluleye, Gbemi & Smith, Robin, 2016. "A mixed integer linear programming model for integrating thermodynamic cycles for waste heat exploitation in process sites," Applied Energy, Elsevier, vol. 178(C), pages 434-453.
    20. Eriksson, Lina & Morandin, Matteo & Harvey, Simon, 2015. "Targeting capital cost of excess heat collection systems in complex industrial sites for district heating applications," Energy, Elsevier, vol. 91(C), pages 465-478.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:263:y:2023:i:pe:s0360544222028560. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.