Author
Abstract
The object of research is the potential of secondary use of waste from the destruction of buildings and structures, which were formed as a result of the military aggression of the Russian Federation on the territory of Ukraine. For Ukraine, the issue of demolition waste is critical at the level of environmental safety and ensuring the demand for building materials for the reclamation of Ukraine according to the principles of the circular economy. To date, there are no official methods that would allow to determine the exact amount of destruction and the quality of the material formed, which complicates the development of mechanisms for its utilization in production. The key industry considered during the research for disposal of demolition waste is the industry of construction materials production.In the course of research, it was determined that most of the generated waste is waste from the destruction of buildings and structures made of precast concrete, however, considering that these wastes are generated by the action of explosions from shells. It is very difficult to ensure their compliance with the requirements of current standards due to the inclusion that such waste can contain. Therefore, the problem considered by this study is the determination of the nature of waste from the destruction of buildings and structures, their physical, mechanical and chemical characteristics, in the context of the final applications of products based on them.The results of the study showed that when reproducing the concrete mix for tared concrete for civil purposes, which do not have high requirements for stability in aggressive operating conditions, when replacing natural aggregate crushed to a fraction of 5 to 20 mm, the requirements for concrete strength are achieved in the level of C40/50 strength class. But the rheological characteristics deteriorate due to the high absorption of water from the concrete mixture by the studied material. Research has shown that for further use in the production of ready-mixed concrete and precast concrete products, it is necessary to prepare demolition waste with a wide particle size distribution and low dust content. This can ensure a high level of recycling and meet the demand for concrete in the reconstruction of Ukraine. The fine aggregate from the demolition waste crushing process can be considered as secondary cementitious material for cement production.
Suggested Citation
Anastasiia Bielohrad, 2024.
"Assessment of the opportunities of demolition waste using as a building material of the future in Ukraine,"
Technology audit and production reserves, PC TECHNOLOGY CENTER, vol. 3(3(77)), pages 25-29, June.
Handle:
RePEc:baq:taprar:v:3:y:2024:i:3:p:25-29
DOI: 10.15587/2706-5448.2024.307317
Download full text from publisher
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:baq:taprar:v:3:y:2024:i:3:p:25-29. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Iryna Prudius (email available below). General contact details of provider: https://journals.uran.ua/tarp/issue/archive .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.