IDEAS home Printed from https://ideas.repec.org/a/caa/jnlrae/v61y2015i1id22-2013-rae.html
   My bibliography  Save this article

Comparison of oil press for jatropha oil - a review

Author

Listed:
  • A.N. Siregar

    (Department of Mechanical and Materials Engineering, Faculty of Engineering and Built Environment, Kebangsaan University, Bangi, Malaysia)

  • J.A. Ghani

    (Department of Mechanical and Materials Engineering, Faculty of Engineering and Built Environment, Kebangsaan University, Bangi, Malaysia)

  • C.H.C. Haron

    (Department of Mechanical and Materials Engineering, Faculty of Engineering and Built Environment, Kebangsaan University, Bangi, Malaysia)

  • M. Rizal

    (Department of Mechanical and Materials Engineering, Faculty of Engineering and Built Environment, Kebangsaan University, Bangi, Malaysia)

  • Z. Yaakob

    (Department of Chemical and Process Engineering, Faculty of Engineering and Built Environment, Kebangsaan University, Bangi, Malaysia)

  • S.K. Kamarudin

    (Department of Chemical and Process Engineering, Faculty of Engineering and Built Environment, Kebangsaan University, Bangi, Malaysia)

Abstract

As petrol will soon be exhausted in the near future, Jatropha is going to be one of the substitute candidates for future biodiesel production. Countries of South-East Asia, such as Malaysia, they are going to start the establishment of Jatropha plantations assuming that Jatropha will be the main resource for biodiesel production. A press is commonly used to extract oils from Jatropha. An oil press can be manually driven or engine-powered. In this paper, we will review some available advances focused on mechanical extraction techniques, covering three types of press for Jatropha oil extraction. We have found that major points like operating principles, oil extraction levels, advantages and disadvantages of each press and important factors to increase oil recovery. Based on the study, three types of press are: ram press, which is ineffective; strainer press, which is able to produce more oil than others and cylinder-hole press, which is the best due to its capacity in extracting oil from Jatropha seeds for about 89.4% of oil yields.

Suggested Citation

  • A.N. Siregar & J.A. Ghani & C.H.C. Haron & M. Rizal & Z. Yaakob & S.K. Kamarudin, 2015. "Comparison of oil press for jatropha oil - a review," Research in Agricultural Engineering, Czech Academy of Agricultural Sciences, vol. 61(1), pages 1-13.
    • Handle: RePEc:caa:jnlrae:v:61:y:2015:i:1:id:22-2013-rae
    DOI: 10.17221/22/2013-RAE
    as

    Download full text from publisher

    File URL: http://rae.agriculturejournals.cz/doi/10.17221/22/2013-RAE.html
    Download Restriction: free of charge
    File URL: http://rae.agriculturejournals.cz/doi/10.17221/22/2013-RAE.pdf
    Download Restriction: free of charge
    File URL: https://libkey.io/10.17221/22/2013-RAE?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Singh, R.N. & Vyas, D.K. & Srivastava, N.S.L. & Narra, Madhuri, 2008. "SPRERI experience on holistic approach to utilize all parts of Jatropha curcas fruit for energy," Renewable Energy, Elsevier, vol. 33(8), pages 1868-1873.
    2. Divakara, B.N. & Upadhyaya, H.D. & Wani, S.P. & Gowda, C.L. Laxmipathi, 2010. "Biology and genetic improvement of Jatropha curcas L.: A review," Applied Energy, Elsevier, vol. 87(3), pages 732-742, March.
    3. Pramanik, K, 2003. "Properties and use of jatropha curcas oil and diesel fuel blends in compression ignition engine," Renewable Energy, Elsevier, vol. 28(2), pages 239-248.
    4. Vang Rasmussen, Laura & Rasmussen, Kjeld & Bech Bruun, Thilde, 2012. "Impacts of Jatropha-based biodiesel production on above and below-ground carbon stocks: A case study from Mozambique," Energy Policy, Elsevier, vol. 51(C), pages 728-736.
    5. Basili, Marcello & Fontini, Fulvio, 2012. "Biofuel from Jatropha curcas: Environmental sustainability and option value," Ecological Economics, Elsevier, vol. 78(C), pages 1-8.
    6. Pradhan, R.C. & Naik, S.N. & Bhatnagar, N. & Vijay, V.K., 2010. "Design, development and testing of hand-operated decorticator for Jatropha fruit," Applied Energy, Elsevier, vol. 87(3), pages 762-768, March.
    7. Forson, F.K & Oduro, E.K & Hammond-Donkoh, E, 2004. "Performance of jatropha oil blends in a diesel engine," Renewable Energy, Elsevier, vol. 29(7), pages 1135-1145.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Silitonga, A.S. & Atabani, A.E. & Mahlia, T.M.I. & Masjuki, H.H. & Badruddin, Irfan Anjum & Mekhilef, S., 2011. "A review on prospect of Jatropha curcas for biodiesel in Indonesia," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(8), pages 3733-3756.
    2. Oumer, A.N. & Hasan, M.M. & Baheta, Aklilu Tesfamichael & Mamat, Rizalman & Abdullah, A.A., 2018. "Bio-based liquid fuels as a source of renewable energy: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 88(C), pages 82-98.
    3. Ceasar, S.A. & Ignacimuthu, S., 2011. "Applications of biotechnology and biochemical engineering for the improvement of Jatropha and Biodiesel: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(9), pages 5176-5185.
    4. Hossain, A.K. & Davies, P.A., 2010. "Plant oils as fuels for compression ignition engines: A technical review and life-cycle analysis," Renewable Energy, Elsevier, vol. 35(1), pages 1-13.
    5. Ong, H.C. & Mahlia, T.M.I. & Masjuki, H.H. & Norhasyima, R.S., 2011. "Comparison of palm oil, Jatropha curcas and Calophyllum inophyllum for biodiesel: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(8), pages 3501-3515.
    6. Mofijur, M. & Masjuki, H.H. & Kalam, M.A. & Hazrat, M.A. & Liaquat, A.M. & Shahabuddin, M. & Varman, M., 2012. "Prospects of biodiesel from Jatropha in Malaysia," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(7), pages 5007-5020.
    7. Silitonga, A.S. & Masjuki, H.H. & Mahlia, T.M.I. & Ong, H.C. & Atabani, A.E. & Chong, W.T., 2013. "A global comparative review of biodiesel production from jatropha curcas using different homogeneous acid and alkaline catalysts: Study of physical and chemical properties," Renewable and Sustainable Energy Reviews, Elsevier, vol. 24(C), pages 514-533.
    8. Tatsidjodoung, Parfait & Dabat, Marie-Hélène & Blin, Joël, 2012. "Insights into biofuel development in Burkina Faso: Potential and strategies for sustainable energy policies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(7), pages 5319-5330.
    9. Pandey, Krishan K. & Pragya, Namita & Sahoo, P.K., 2011. "Life cycle assessment of small-scale high-input Jatropha biodiesel production in India," Applied Energy, Elsevier, vol. 88(12), pages 4831-4839.
    10. Hasan, M.M. & Rahman, M.M., 2017. "Performance and emission characteristics of biodiesel–diesel blend and environmental and economic impacts of biodiesel production: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 74(C), pages 938-948.
    11. Kalam, M.A. & Ahamed, J.U. & Masjuki, H.H., 2012. "Land availability of Jatropha production in Malaysia," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(6), pages 3999-4007.
    12. Wang, Rui & Song, Baoan & Zhou, Wanwei & Zhang, Yuping & Hu, Deyu & Bhadury, Pinaki S. & Yang, Song, 2011. "A facile and feasible method to evaluate and control the quality of Jatropha curcus L. seed oil for biodiesel feedstock: Gas chromatographic fingerprint," Applied Energy, Elsevier, vol. 88(6), pages 2064-2070, June.
    13. Merlin, Ayissi Zacharie & Marcel, Obounou Akong & Louis Max, Ayina Ohandja & Salem, Chabira & Jean, Gerard, 2015. "Development and experimental investigation of a biodiesel from a nonedible woody plant: The Neem," Renewable and Sustainable Energy Reviews, Elsevier, vol. 52(C), pages 201-208.
    14. Moniruzzaman, M. & Yaakob, Zahira & Khatun, Rahima, 2016. "Biotechnology for Jatropha improvement: A worthy exploration," Renewable and Sustainable Energy Reviews, Elsevier, vol. 54(C), pages 1262-1277.
    15. Sidibé, S.S. & Blin, J. & Vaitilingom, G. & Azoumah, Y., 2010. "Use of crude filtered vegetable oil as a fuel in diesel engines state of the art: Literature review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(9), pages 2748-2759, December.
    16. Y. V. Hanumantha Rao & Ram Sudheer Voleti & V.S. Hariharan & P. Nageswara Reddy & A.V. Sita Rama Raju, 2009. "Performance and Emission Characteristics of Diesel Engine with Methyl Ester Jatropha Oil and its Blends," Energy & Environment, , vol. 20(8-1), pages 1343-1355, December.
    17. Palash, S.M. & Kalam, M.A. & Masjuki, H.H. & Masum, B.M. & Rizwanul Fattah, I.M. & Mofijur, M., 2013. "Impacts of biodiesel combustion on NOx emissions and their reduction approaches," Renewable and Sustainable Energy Reviews, Elsevier, vol. 23(C), pages 473-490.
    18. Tainaka, Kazuki & Fan, Yong & Hashimoto, Nozomu & Nishida, Hiroyuki, 2019. "Effects of blending crude Jatropha oil and heavy fuel oil on the soot behavior of a steam atomizing burner," Renewable Energy, Elsevier, vol. 136(C), pages 358-364.
    19. Atabani, A.E. & Silitonga, A.S. & Ong, H.C. & Mahlia, T.M.I. & Masjuki, H.H. & Badruddin, Irfan Anjum & Fayaz, H., 2013. "Non-edible vegetable oils: A critical evaluation of oil extraction, fatty acid compositions, biodiesel production, characteristics, engine performance and emissions production," Renewable and Sustainable Energy Reviews, Elsevier, vol. 18(C), pages 211-245.
    20. Ewunie, Gebresilassie Asnake & Morken, John & Lekang, Odd Ivar & Yigezu, Zerihun Demrew, 2021. "Factors affecting the potential of Jatropha curcas for sustainable biodiesel production: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 137(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:caa:jnlrae:v:61:y:2015:i:1:id:22-2013-rae. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Ivo Andrle (email available below). General contact details of provider: https://www.cazv.cz/en/home/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.