IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i20p7616-d943083.html
   My bibliography  Save this article

Characterization of a Non-Darcy Flow and Development of New Correlation of NON-Darcy Coefficient

Author

Listed:
  • Abadelhalim Elsanoose

    (Faculty of Engineering and Applied Science, Memorial University of Newfoundland, St. John’s, NL A1C 5S7, Canada)

  • Ekhwaiter Abobaker

    (Faculty of Engineering and Applied Science, Memorial University of Newfoundland, St. John’s, NL A1C 5S7, Canada)

  • Faisal Khan

    (Faculty of Engineering and Applied Science, Memorial University of Newfoundland, St. John’s, NL A1C 5S7, Canada)

  • Mohammad Azizur Rahman

    (Petroleum Engineering, Texas A&M University at Qatar, Doha 23874, Qatar)

  • Amer Aborig

    (Faculty of Engineering and Applied Science, Memorial University of Newfoundland, St. John’s, NL A1C 5S7, Canada)

  • Stephen D. Butt

    (Faculty of Engineering and Applied Science, Memorial University of Newfoundland, St. John’s, NL A1C 5S7, Canada)

Abstract

Darcy’s law has long been used to describe the flow in porous media. Despite the progress that took place in oil production industry research, it became clear that there is a loss of pressure, especially in the area near the wellbore region, where Darcy’s law is not applicable. For this reason, Forchheimer presented his equation in 1910, where he added a new term to Darcy’s law dealing with pressure loss due to inertial forces by introducing a new term, the β coefficient, into the equation. This paper presents a study of fluid flow through porous media, where water was used as a working fluid. Furthermore, the characteristics of the non-Darcy flow were analyzed by presenting the corresponding pressure and velocity gradient curves for each pressure. Extensive analysis indicates that many of the correlations available in the literature either have defective units or are the product of a small number of experiments. In this study, we benefit from relatively large samples, the radial flow, and the perforation in the middle of the samples. The properties of the samples were measured using mercury intrusion porosimetry. It was found that there is a direct relationship between the porosity and the grain’s size; the greater the size of the grains, the greater the porosity, and vice versa. The non-Darcy coefficient term, β, is found to be inversely proportional to the porosity and permeability. In a previous study, the β was investigated for compressible flow scenarios; however, this study calculated it for an incompressible flow. Finally, by analyzing the β values of both studies, we could deduce new novelty correlations for the β coefficient term, where the permeability, porosity, and tortuosity are included.

Suggested Citation

  • Abadelhalim Elsanoose & Ekhwaiter Abobaker & Faisal Khan & Mohammad Azizur Rahman & Amer Aborig & Stephen D. Butt, 2022. "Characterization of a Non-Darcy Flow and Development of New Correlation of NON-Darcy Coefficient," Energies, MDPI, vol. 15(20), pages 1-16, October.
  • Handle: RePEc:gam:jeners:v:15:y:2022:i:20:p:7616-:d:943083
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/20/7616/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/15/20/7616/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:20:p:7616-:d:943083. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.